Using white anti-cracking high belite CSA cement to make countertops, artificial stones, concrete marbles, and other GFRC products

Using white anti-cracking high belite CSA cement to make countertops, artificial stones, concrete marbles, and other GFRC products

Now by using white anti-cracking high belite CSA cement to make countertops, artificial stones, concrete marbles, and other GFRC product is available. High belite CSA cement is developed on the basis of CSA cement, and it has more better color, volume change rate ( Low shrinkage and Little expansion), Low PH value, low heat of hydration,etc.

The performances of High belite CSA cement:
1.     Rapid set, Rapid hardening
2.     High strength
3.     Little expansion, low shrinkage, low volume changes
4.     Sulfate resistance, resistance of sea water
5.     Corrosion resistance
6.     Frost resistance
7.     Low heat of hydration
8.     Low PH value ( Lower than 10.00 for GRC products )
9.     Whiteness developed
10.  Anti-efforescence
11.  Can be mixed with Portland cement, performances of shrinkage problems, cracking problems will be enhanced.

Applications:

Decorative mortar
Interior & Exterior wall putty
Indoor and Outdoor self leveling floor screeds
Cementitous Self leveling mortars
Artifical agglomerated stone, man-made marble, artificial flooring, countertops, Decoration boards, etc.
Concrete repairing material and self leveling repair mortar
Anti-crack Plastering mortar
Exterior insulation mortar，adhesive mortar, tile adhesives
Decorative concrete
Precast concrete
Concrete construction
Large volume concrete, etc.


For more product informations, please contact me. E-mail: csacement@gmail.com








Comments

Post a Comment

Popular posts from this blog

CSA cement ( CSA binder )

Introduction General characteristics CSA Cement, also named Calcium Sulpho Aluminate Cement with grade: 42.5, 52.5, 62.5, 72.5, 82.5, 92.5, is a hydraulic binder based on calcium sulpho aluminate, rather than calcium aluminates which are the basis of Calcium Aluminates Cement or calcium silicates which are the basis of Portland Cement. It can be used on its own (with a Lithium accelerator), or with an Anhydrite, Portland cement mix, Metakaolin or a combination of all. CSA Cement has the benefit of being readily adaptable to suit many different applications where both rapid set and / or high early strength gain are required. It yields controlled set, enhanced early strengths, shrinkage compensation or expansion and sulphate resistance. Uses include any cement-based product in need of these properties. CSA Cement products exhibit a range of properties to suit a wide spectrum of cement-based applications, like fast setting cements, self-leveling or self-smoothing compounds, sel
Read more

Specialty cement technology-Rapid set CSA cement, High performance of concrete and mortars

Image
CSA cement, full name is Calcium Sulfoaluminate cement, was invented and developed in China since 1970's. It is 100% cement, get ready to use. As the third generation of cements, it is widely used on construction for decades in China. The cement has been used on concrete for bridges, airports, concrete road repair, winter construction and many other applications where early strength and time needed.As well as high strength concrete, high performance of mortars, like Self levelling compounds,tile adhesives,Non shrinkage grouts,etc. The product obtained by grinding cement clinker obtained by roasting suitable raw material, consisting essentially of anhydrous calcium sulphoaluminate and dicalcium silicate. Suitable gypsum and 0-10% limestone shall be blended with clinker during manufacture of rapid-hardening sulphoaluminate cement. The rapid-hardening cement product is hydraulicity binding material. It has high early strength. The code no is R-SAC. Specific surface are
Read more