CSA cement ( Rapid set cement )

CSA cement is one type of cement has the
advantages of super high early and final strength, low alkaline, fast setting time, rapid hardening, frost & corrosion
resistance, etc. Due to its wonderful performance, it can be used in many applications like mining industry,
bridge decks, airport runways, patching concrete roadways, sidewalks, pavements, etc. where rapid strength developments
are necessary.
CSA cements offer tremendous advantages over Portland cement in terms of strength, setting time, speed and
greeness .It main features are high initial and final strength, concentrative hydrating heat release, fast setting
time, good fluidity, high frost and corrosion resistance, impermeability, low carbon, etc.
It can be used in the following areas:
1. High strength cement & concrete
2. Dry mortars, such as tile adhesive, high strength grouting materials, self-leveling materials, rapid setting
mortars, etc.
3. Concrete repair materials, Pavement repairs and other repair materials
4. Sprayed Concretes and Shotcretes
5. Plasters & Mortars (i.e. Joints, Sulfate resistance, Non-shrinkage, etc.)
6. Concrete precast products
7. Countertops, pots, and other GFRC products.
8. Mining industry
9. Etc.

Comments

Post a Comment

Popular posts from this blog

CSA cement ( CSA binder )

Introduction General characteristics CSA Cement, also named Calcium Sulpho Aluminate Cement with grade: 42.5, 52.5, 62.5, 72.5, 82.5, 92.5, is a hydraulic binder based on calcium sulpho aluminate, rather than calcium aluminates which are the basis of Calcium Aluminates Cement or calcium silicates which are the basis of Portland Cement. It can be used on its own (with a Lithium accelerator), or with an Anhydrite, Portland cement mix, Metakaolin or a combination of all. CSA Cement has the benefit of being readily adaptable to suit many different applications where both rapid set and / or high early strength gain are required. It yields controlled set, enhanced early strengths, shrinkage compensation or expansion and sulphate resistance. Uses include any cement-based product in need of these properties. CSA Cement products exhibit a range of properties to suit a wide spectrum of cement-based applications, like fast setting cements, self-leveling or self-smoothing compounds, sel
Read more

Specialty cement technology-Rapid set CSA cement, High performance of concrete and mortars

Image
CSA cement, full name is Calcium Sulfoaluminate cement, was invented and developed in China since 1970's. It is 100% cement, get ready to use. As the third generation of cements, it is widely used on construction for decades in China. The cement has been used on concrete for bridges, airports, concrete road repair, winter construction and many other applications where early strength and time needed.As well as high strength concrete, high performance of mortars, like Self levelling compounds,tile adhesives,Non shrinkage grouts,etc. The product obtained by grinding cement clinker obtained by roasting suitable raw material, consisting essentially of anhydrous calcium sulphoaluminate and dicalcium silicate. Suitable gypsum and 0-10% limestone shall be blended with clinker during manufacture of rapid-hardening sulphoaluminate cement. The rapid-hardening cement product is hydraulicity binding material. It has high early strength. The code no is R-SAC. Specific surface are
Read more